ZENIT

Description:

This course aims to guide users in connecting HMI to PLC and setting parameters for objects.

Instruction Description:

Use ZENIT HMI to connect to Siemens SIMATIC S7-1200 PLC and Mitsubishi FX5U-32M PLC via Ethernet. First, set the communication protocol and IP address, configure the communication settings and register settings to establish a connection with the PLC. You can then easily use the rich monitoring components on ZENIT HMI to monitor and control these two PLCs.

Steps:

1. Set up the connection

2. Drag out the required objects

3. Set the register information for the objects